Product Description

Epox  WT

EpoxWT is a two component water based food grade epoxy system specially formulatedfor water proofing of water tanks. It is odorless, non toxic, non flammable andeco- friendly. Unlike pure epoxy resins, it can also be applied on dampsurfaces.

Technical Data

ResinAppearance  White Colour

HardenerAppearance         Yellow Colour

FilmAppearance     Transparent glossy

PotLife                      45 min at 35c

Coverage                   35-40 Sq.ft per Kg/mix

Shelflife                     12-15 months in original packing

ApplicationProcedure

1.Clean the surface with water to make it free from dust, grease, oil etc.

2.If cracks are observed, widen it and fill it with Poly bond Acro &cement putty.

3. Ina clean vessel, mix one part of resin & one part of hardener by weight.Stir it slowly to achieve a homogeneous mix. If viscosity of mix is higher add little water (5-10%) and stir properly.

4.Apply two coats with a brush in an interval of 24 hours.

5.Fill the tank with water after 24 hours.

Precaution

1.Prepare adequate of material, which can be used in 30 minutes.

2.Wash the brush immediately after use.

3.Donït retamper the mix with water again & again.

Advantages

1.It is non-toxic & non-flammable.

2.It is self curing. No additional curing method is required.

3.Can be safely used in contact with drinking water.

Uses:In water tanks

Packing: Kg, 1Kg, 4Kg (each component)

The information given is true to the best of our  knowledge. They are offered in good faith but without guarantee as conditions and methods of use of all our products are beyond our control. Users are requested to determine the suitability of our material before adopting them on a commercial scale.